Cleaner Air Oregon is a health-based permitting program that regulates emissions of toxic air contaminants from facilities based on risk to nearby communities. CAO requires facilities to report toxic air contaminant emissions, assess potential health risks to people nearby and reduce toxic air contaminant risk if it exceeds legal limits.
As part of the Cleaner Air Oregon process, each facility has a dedicated web page to provide communities access to facility information and updates on where it is involved in the process.
- Each step of the CAO risk assessment process has a section that includes DEQ's communications and deliverables from the facility.
- The graphic below shows where a facility is in the Cleaner Air Oregon Process.
For additional information and history of the program, visit the Cleaner Air Oregon website.
The Emissions Inventory provides information on all the Toxic Air Contaminant emissions from a facility, and includes information on a facility's operations and activities, as well as fuel and material usage rates. This is often the longest step in the CAO risk assessment process as DEQ needs to verify that all activities have been accounted for, and that the most representative emissions data available are used. In some cases, DEQ will require a facility to perform source testing at this stage if insufficient data is available to estimate emissions. For an introduction to emissions inventories and why they matter, please see EPA's Fact Sheet.
Aug. 29, 2024: Facility Called In to Cleaner Air Oregon
Nov. 26, 2024: Facility submitted Emissions Inventory and Supporting Information (currently in DEQ review)
About the Facility
acpi Wood Products, LLC manufactures wood kitchen cabinets and bathroom vanities. The facility processes raw material wood panel products and dimensional lumber through to assembled finished cabinets. Activities at the facility involve preparation of cabinet and box parts from raw materials wood products (cutting, sanding, and machining), frame assembly (gluing and sanding), finishing (spray coating), and assembly (gluing). The facility (previously Elkay Wood Products) is within the city limits of Independence and has been operating since 2001.